Get the choice, quality & service you want with professionals.
All palletised loads benefit from automated wrapping as opposed to using hand wrap film applied by an operator. Automated wrapping removes those Health & Safety concerns employers should have about the application of hand film which can cause serious back problems and associated trip hazards when moving around a pallet on the floor with a roll of film. Installation and operation of the wrapper is so easy and straightforward, there is no need for a time consuming, money wasting, on site demonstration.
The semi automatic stretch wrapping machine is flat packed for on site installation using your own, non technical, staff. The semi automatic stretch wrapping machine comes with a detailed manual explaining how to install, connect and operate the machine. Installation is very straightforward and could not be easier. The mast is already pre wired internally and secured to the base with a fixed hinge so all you have to do is raise the mast and secure with the bolts supplied. The film carriage is already in place so everything is ready to go in a few minutes. Power connection could not be easier, the machine comes with a five metre flex cable with the wires pre prepared for your plug top or for wiring directly into the factory ring main. The machine uses a 6 amp, 240v supply which should be protected with a 300ma breaker. Should you experience any problems or need clarification regarding any part of the installation or operation you can call us on our helpline number which will be issued with the machine at collection.
Our semi automatic stretch wrapping machine is a conventional turntable wrapper with vertical mast. Pallet wrapper is supplied with a core brake film carriage which makes it ideal for wrapping a huge and diverse range of palletised loads using normal everyday stretch film as well as higher performing "pre stretched" films which are gaining popularity daily. This in NOT a "budget" machine. Designed, manufactured and assembled in Italy all our machines are precision made using high quality components from suppliers you can trust such as Siemens, Schneider Electric, Omron, Weidmuller, SKF and Motovario. The machine comes with an electronic parts manual which allows you to identify parts down to the last nut, bolt and washer. As a reflection on the quality build of these machines, they come with a 12month warranty (excluding wear parts) giving the end user added confidence.
- Very easy installation
- Simple to understand operator controls (click on picture above)
- Fork access front and back
- Reinforced turntable support
- Automatic height sensing of load
- Pre set load height without photocell if required (open cages etc)
- Adjustable bottom wraps
- Adjustable top wraps
- Facility to place a re enforcing band(s) around the load at any point
- Facility to pause mid-cycle to place a waterproof top sheet
- Adjustable up/down carriage speed
- Adjustable film tension
- Adjustable turntable speed
- Soft start to prevent load tipping
- Controls lockout to stop tampering (Parental lock)
- Only 240v 6 Amp single phase power supply required
- 1650mm diameter turntable for 1200 x 1000 pallets (UK Standard)
- 2,200mm load height (including the pallet)
- Optional ramp for loading with "ride on" or pump trucks
- Optional grounding frame for installing the turntable at gound level
- Optional "horseshoe" table for Euro pallets (only)
|Daily pallet flow:
Up to 30 pallets/day
Please note that the daily pallet flows, only indicates to models that might be suitable. Facts like pallet weight, height, configurations, etc. must be considered when choosing the best machine model for your use.
|Rotary plate diameter:
|Rotary plate speed:
||Up to 12 r.p.m (Frequency controlled, soft start/soft rundown)
||4 standard programs (incl. rainproof); 2 free programs (optional)
|Prestretch ratio on the
|1, 25, 45, 65, 90, 135, 170 or 210% adjustable
|Pallet size (legth x width):
||1200 x 1200 mm (max. diagonal of 1675 mm)
|Permitted load weight:
||Up to 1500 kg
|Maximum goods height incl. pallet:
||Up to 2200 mm
|Minimum goods height incl. pallet:
||500 mm; Minimum: 750 mm when using the option holding-down device
||Approx. 510 kg
||< 70 dB(A) to DIN 45635 Part 27 (Cast film, 9 rpm)
||5°C (40°F) to 35°C (95°F) for use in a dry, tempered area.
||All Cyklop machines can handle film thicknesses 9-35 microns in both blown and cast qualities, pre-stretched or regular. Please note that the best package quality and lowest cost per pallet will always be obtained by using high quality films regardless of the film thickness.
Film width: 500 mm
Diameter: max. 250 mm
Core diameter: 76 mm
- Operating voltage: 3-phase 400 V+N+PE, 50 Hz
- Control voltage: 24 V
- Degree of protection: IP 54
- Loading: 16 A
Warranty: This machine comes with a 12 month manufacturer 'return to base' warranty. In the event of a breakdown (which is extremely rare), simply send the machine to us and we will repair and send back to you.